Plain rectangular weld-on tabs and spacer plates in 3 mm, 4 mm or 5 mm mild steel, 304 or 316 stainless steel, sold in packs of 10, 25, 50 or 100. Each pack is nested and plasma cut in one run in our Knowsley workshop, then deburred.
Need tabs with holes or slots, or a radiused end? See custom weld-on tabs and send us a drawing.
Welders use flat tabs as weld-on mounting points on frames, trailers and machinery, as packers and spacer plates to bring parts level, and as small blanks to drill to suit on site. Buying them in a pack saves cutting them one at a time with a grinder, and every piece in the pack is the same size.
Made to order. We email your dispatch date. See delivery rates. Need bigger plain plates? Try rectangular plate cut to size, or triangular gusset plates for stiffening corners.
Do the tabs have holes?
No. These are plain blanks. For holes or slots, use our custom tabs page.
Are these laser cut?
No. They are plasma cut and deburred, so edges show a plasma-cut finish and are not held to laser tolerances.
How much does a pack weigh?
100 mild steel tabs at 50 × 100 × 3 mm weigh about 12 kg. A 25 × 50 × 3 mm tab weighs about 30 g.
Can I use them as shims?
Yes, as packers or spacers in 3, 4 or 5 mm. Stack tabs to build up height. They are not precision-ground shims.
Plain rectangular weld-on tabs and spacer plates in 3 mm, 4 mm or 5 mm mild steel, 304 or 316 stainless steel, sold in packs of 10, 25, 50 or 100. Each pack is nested and plasma cut in one run in our Knowsley workshop, then deburred.
Need tabs with holes or slots, or a radiused end? See custom weld-on tabs and send us a drawing.
Welders use flat tabs as weld-on mounting points on frames, trailers and machinery, as packers and spacer plates to bring parts level, and as small blanks to drill to suit on site. Buying them in a pack saves cutting them one at a time with a grinder, and every piece in the pack is the same size.
Made to order. We email your dispatch date. See delivery rates. Need bigger plain plates? Try rectangular plate cut to size, or triangular gusset plates for stiffening corners.
Do the tabs have holes?
No. These are plain blanks. For holes or slots, use our custom tabs page.
Are these laser cut?
No. They are plasma cut and deburred, so edges show a plasma-cut finish and are not held to laser tolerances.
How much does a pack weigh?
100 mild steel tabs at 50 × 100 × 3 mm weigh about 12 kg. A 25 × 50 × 3 mm tab weighs about 30 g.
Can I use them as shims?
Yes, as packers or spacers in 3, 4 or 5 mm. Stack tabs to build up height. They are not precision-ground shims.
